From: dmsmice@gmail.com   
      
   On Thursday, July 27, 2023 at 3:18:00 PM UTC-4, Jose Deras wrote:   
   > On Thursday, January 7, 2021 at 1:14:46 AM UTC-6, camthe...@yahoo.com   
   wrote:    
   > > Also looking for these. If anyone could 3d print me a couple and send them   
   my way I’d pay a fair few dollars. 5.25 bezels for the 9595/8595 would be   
   welcome too.   
   > Replying to bump my thread here. Anyone have a 3d STL for the bezel/rails   
   for a PS/2 Model 90 CD-ROM? Since the best option is just the trim for a   
   generic 5.25" drive that would be even more versatile.    
   >    
   > Or a real until to measure for us to design such a print?   
      
   All of those parts are available in stl format    on "thingverse"    for free.   
   along with many other 3d printable IBM copied parts...   
      
   The cdrom sled and front bezel for a model 95 print better using petg   
   filament. and print  better if you add supports    
   and remove them from the finished parts.  The bridging was too far for my   
   printer...   
    I had to mess with the overall  finished part size as well .  before the   
   slicer...   
   They were setup with too long of bridging for my makerbot printer...   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)