From: apat4free@gmail.com   
      
   Dears in most of the case the issue lies with the (incorrect) jumper   
   settings. Please look at my photos in ardent for a default (working)   
   config. Be careful of the two different versions which need different   
   setups.   
      
      
   Louis Ohland  wrote:   
   > I looked at the images, there is no apparent outline for a second port   
   > on the 8514/A, nor are there any solder pads for any AVE header, unlike   
   > on the XGA.   
   >   
   > Huh, maybe the XGA was considered for dual head?   
   >   
   > Jonathan Carron wrote:   
   >> Yeah, I suspect that you could sort of create a dual ahead sort of setup   
   >> using one of these back in the day.   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)