From: ohland@charter.net   
      
   I forgot about the jumpers.   
      
   Alexandros wrote:   
   >   
   > Dears in most of the case the issue lies with the (incorrect) jumper   
   > settings. Please look at my photos in ardent for a default (working)   
   > config. Be careful of the two different versions which need different   
   > setups.   
   >   
   >   
   > Louis Ohland  wrote:   
   >> I looked at the images, there is no apparent outline for a second port   
   >> on the 8514/A, nor are there any solder pads for any AVE header, unlike   
   >> on the XGA.   
   >>   
   >> Huh, maybe the XGA was considered for dual head?   
   >>   
   >> Jonathan Carron wrote:   
   >>> Yeah, I suspect that you could sort of create a dual ahead sort of setup   
   >>> using one of these back in the day.   
   >>   
   >   
   >   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)