From: ohland@charter.net
Version: 1.00
AdapterId 08FA8h "IBM EtherStreamer MC32 Adapter"
NumBytes 4
FixedResources
POS[0]=1xxxxxxxb
POS[2]=x1xx0xx1b
Begin NoDMA
"Adapter Media Type Selection" Select which cable type connects the NIC
to the network. Autosense [adapter selects], Attachment Unit Interface
(AUI), Unshielded Twisted Pair (UTP or 10BASE T), or Coax (10BASE2).
, UTP, COAX, AUI
"System Interrupt Level" Interrupt level used to interrupt the system
unit. The preferred interrupt level is 3, but the adapter can operate
on any of the four levels if necessary.
, 2 [Int 02h], 10 [Int 0Ah], 11 [Int 0Bh]
"Micro Channel I/O Address"
Choice "1C00-1CFF" POS[0]=x000111xb IO 01C00h-01CFFh
Choice "2000-20FF" POS[0]=x001000xb IO 02000h-020FFh
Choice "2400-24FF" POS[0]=x001001xb IO 02400h-024FFh
Choice "2800-28FF" POS[0]=x001010xb IO 02800h-028FFh
Choice "2C00-2CFF" POS[0]=x001011xb IO 02C00h-02CFFh
Choice "3000-30FF" POS[0]=x001100xb IO 03000h-030FFh
Choice "3400-34FF" POS[0]=x001101xb IO 03400h-034FFh
Choice "3800-38FF" POS[0]=x001110xb IO 03800h-038FFh
Choice "3C00-3CFF" POS[0]=x001111xb IO 03C00h-03CFFh
Choice "4000-40FF" POS[0]=x010000xb IO 04000h-040FFh
Choice "4400-44FF" POS[0]=x010001xb IO 04400h-044FFh
Choice "4800-48FF" POS[0]=x010010xb IO 04800h-048FFh
Choice "4C00-4CFF" POS[0]=x010011xb IO 04C00h-04CFFh
Choice "5000-50FF" POS[0]=x010100xb IO 05000h-050FFh
Choice "5400-54FF" POS[0]=x010101xb IO 05400h-054FFh
Choice "5800-58FF" POS[0]=x010110xb IO 05800h-058FFh
Choice "5C00-5CFF" POS[0]=x010111xb IO 05C00h-05CFFh
Choice "6000-60FF" POS[0]=x011000xb IO 06000h-060FFh
Choice "6400-64FF" POS[0]=x011001xb IO 06400h-064FFh
Choice "6800-68FF" POS[0]=x011010xb IO 06800h-068FFh
Choice "6C00-6CFF" POS[0]=x011011xb IO 06C00h-06CFFh
Choice "7000-70FF" POS[0]=x011100xb IO 07000h-070FFh
Choice "7400-74FF" POS[0]=x011101xb IO 07400h-074FFh
Choice "7800-78FF" POS[0]=x011110xb IO 07800h-078FFh
Choice "7C00-7CFF" POS[0]=x011111xb IO 07C00h-07CFFh
Choice "8000-80FF" POS[0]=x100000xb IO 08000h-080FFh
Choice "8400-84FF" POS[0]=x100001xb IO 08400h-084FFh
Choice "8800-88FF" POS[0]=x100010xb IO 08800h-088FFh
Choice "8C00-8CFF" POS[0]=x100011xb IO 08C00h-08CFFh
Choice "9000-90FF" POS[0]=x100100xb IO 09000h-090FFh
Choice "9400-94FF" POS[0]=x100101xb IO 09400h-094FFh
Choice "9800-98FF" POS[0]=x100110xb IO 09800h-098FFh
Choice "9C00-9CFF" POS[0]=x100111xb IO 09C00h-09CFFh
Choice "A000-A0FF" POS[0]=x101000xb IO 0A000h-0A0FFh
Choice "A400-A4FF" POS[0]=x101001xb IO 0A400h-0A4FFh
Choice "A800-A8FF" POS[0]=x101010xb IO 0A800h-0A8FFh
Choice "AC00-ACFF" POS[0]=x101011xb IO 0AC00h-0ACFFh
Choice "FC00-FCFF" POS[0]=x111111xb IO 0FC00h-0FCFFh
HELP "This option allows you to select the micro channel I/O
address range of the adapter. For micro channel I/O
cycles, this Ethernet Network adapter is selected when the micro
channel I/O address is within a 256 byte region. If more than
one adapter is used in your computer, each adapter must be
assigned a separate I/O address range. The assignment for the
I/O address range can be changed by selecting 'CHANGE
CONFIGURATION'
and then using the F5=PREVIOUS and the F6=NEXT keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and the I/O address range
must be changed. If a conflict continues to exist, you may
need to change the assignments for other options that are in
your computer to resolve the conflict."
"Streaming Data Select" The ES 32 can operate with or without Data
Streaming. For best performance, select .
, Disabled
"Fairness" Whether the adapter will share the bus equitably with other
devices or retain control of the bus as needed. Default is .
, Fairness OFF
NamedItem Prompt "Arbitration Level"
Choice "Level 1" POS[3]=xxxx0001b arb 01h
Choice "Level 2" POS[3]=xxxx0010b arb 02h
Choice "Level 3" POS[3]=xxxx0011b arb 03h
Choice "Level 4" POS[3]=xxxx0100b arb 04h
Choice "Level 5" POS[3]=xxxx0101b arb 05h
Choice "Level 6" POS[3]=xxxx0110b arb 06h
Choice "Level 7" POS[3]=xxxx0111b arb 07h
Choice "Level 8" POS[3]=xxxx1000b arb 08h
Choice "Level 9" POS[3]=xxxx1001b arb 09h
Choice "Level A" POS[3]=xxxx1010b arb 0Ah
Choice "Level B" POS[3]=xxxx1011b arb 0Bh
Choice "Level C" POS[3]=xxxx1100b arb 0Ch
Choice "Level D" POS[3]=xxxx1101b arb 0Dh
Choice "Level E" POS[3]=xxxx1110b arb 0Eh
Help "This Ethernet Network adapter
can operate on one of thirteen arbitration levels: 1, 2, 3 or
5 thru E. If more than one adapter is used in your computer,
each adapter must be assigned a separate arbitration level.
Assignment for the arbitration level can be changed by
selecting 'CHANGE CONFIGURATION' and then using the
F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and the arbitration level
must be changed. If a conflict continues to exist, you may
need to change the assignments for other adapters or options
that are in your computer to resolve the conflict."
"Parity Enable/Monitor Feedback" The ES 32 can generate and check data
and address parity. The ES 32 also provides the capability of monitoring
slave device's Selected Feedback Return Exception signals during DMA
operations.
, Parity ON /Monitor OFF, Parity
OFF/Monitor ON, Parity ON /Monitor ON
--- SoupGate-DOS v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)
|
