home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   comp.sys.ibm.ps2.hardware      Discussing IBM PS/2 hardware      42,985 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 42,768 of 42,985   
   Louis Ohland to All   
   All ADF sections used by 8573-P70 [excep   
   07 Jan 25 11:08:11   
   
   From: ohland@charter.net   
      
   @EDAF Plasma Display Adapter ADF is internal to something. Somebody   
   needs to go into set and view configuration and cycle through the video   
   items. That means going into each item and scrolling [F5 or F6] through   
   the settings.   
      
   Pictures of the set and view screens for the item[s] is what is needed.   
   You can just write down the individual settings, no need for a picture   
   of each setting,   
      
   FFAF	PS/2 Model P70 (8573) Type 1 Planar 386DX-16   
   F4FF	PS/2 Model P70 (8573) Type 2 Planar 386DX-16 or -20   
      
   0F4FFh or 0FFAFh 8573-P70 Built In Features   
      
   NumBytes 1   
      
   FixedResources   
            pos[0]=XXXXXX11b io 03f0h-03f7h 0d00h-0d07h   
                                             int 6   
                                             arb 2   
                                             mem 0fffe0000h - 0ffffffffh   
      
   sysmem 1024   
      
   "Serial Port"   
       The serial port can be set as Serial 1, Serial 2, or disabled.   
       <"SERIAL_1"  [03f8h-03ffh int 4]>, 2 [02f8h-02ffh int 3], Disabled   
      
   "Parallel Port"   
       The parallel port can be set as Parallel 1 - 3 or disabled.   
       <"PARALLEL_1" [03bch-03bfh]>, 2 [0378h-037bh], 3 [0278h-027bh], Disabled   
      NOTE: Parallel 2 is the clone LPT1.   
      
      
   @EDAF Plasma Display Adapter internal to planar?   
      
      
   AdapterID DF9F Integrated Fixed Disk and Controller   
      
   DMA Arbitration Level   
       DMA channel used to transfer data   
          <"Level 5">, 6, 7, 0, 1, 3, 4   
      
   DMA Burst Pacing Interval   
       Interval between DMA transfer bursts during which the Micro Channel   
   is released by the   
      
   fixed disk controller for use by the processor.   
          <24 Microseconds>, 31, 16, Burst Disabled   
      
   DMA Pacing Control   
       Enables or disables "DMA Burst Pacing Interval"   
          <"Disabled">, Enabled   
      
   Time to Release   
       Time the fixed disk controller keeps the Micro Channel after being   
   preempted. If 'DMA   
      
   Pacing Control' is , the Time to Release defaults to immediate.   
   Under normal   
      
   circumstances, select <6 Microseconds>.   
       <"6 Microseconds">, 3, Immediate   
      
   Fairness On/Off [Bus Arbitration]   
        Adapter releases control of the bus when it has been using it   
   exclusively   
       <"On">, Off   
      
   Primary/Alternate Port Addresses   
       Port addresses are  or  [both work equally   
   well]. If there are two   
      
   DBA-ESDI disks, then select  for one and  for the other.   
       <"Primary" (io 3510h-3517h)>, Alternate (3518-351f)   
      
   --- SoupGate-DOS v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca