91f1f64b   
   From: ohland@charter.net   
      
     Both front mounting posts twisted off right where they met the   
   horizontal frame and the JB PlasticWeld squeezed a little into the space   
   between the parts. WD40 Specialist Dry Lube did a good job of keeping   
   the torque needed to screw in the screws to a reasonable level...   
      
   Got back from Ace Hardware, used .125" thick nylon washers [Hillman] to   
   space the front frame screws' captive metal washer. Used two nylon   
   washers, a smaller OD nestled inside a larger ID to fill the entire area   
   under the captive metal washer.   
      
   Seems to be a firm fit.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)