[continued from previous message]   
      
   > such as 10, or those between which are running Microsoft Security   
   > Essentials, you have to enable SMBv1.  To do this ...   
   >   
   > Windows 10+: Run Powershell as Admin and enter the following:   
   >    Enable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol   
   >   
   > Windows 7-:  SMBv1 is enabled by default, so normally no change is   
   > needed, however, ISTR that installing Microsoft Security Essentials   
   > disables it, in which case you have to set or make a registry change to   
   > enable it, as follows:   
   >   
   > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters   
   >   
   >   
   > Registry entry: SMB1   
   > REG_DWORD: 0 = Disabled   
   > REG_DWORD: 1 = Enabled   
   > Default: 1 = Enabled (No registry key is created)   
   >   
   > Windows 8 versions:  I'm not sure about and cannot test here, but one or   
   > the other of the above should work.   
   >   
   > In all versions of Windows, allegedly you have to reboot after making   
   > the changes, but perhaps restarting the service may suffice; again, as   
   > it's a while since I had to do this, I can't definitely say that this   
   > would work:   
   >    net stop Server   
   >    net start Server   
   >   
   >   
      
      
   --   
   Graham J   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)