From: this@ddress.is.invalid   
      
   Fokke Nauta  wrote:   
   > On 17/12/2025 15:19, Frank Slootweg wrote:   
   > > Fokke Nauta  wrote:   
   > >> On 16/12/2025 17:22, Frank Slootweg wrote:   
   > >>> Paul  wrote:   
   > >>> [...]   
   > >>>> Since the error at the moment, is one of Network Path Not Found,   
   > >>>> I don't think it is getting tested on credentials just yet. First   
   > >>>> it has to connect, before it can be rejected on credentials :-)   
   > >>>   
   > >>>     I agree [1]. Coming to think of it, could it be something simple as   
   > >>> the workgroup being inconsistent accross his network? I.e. the computer   
   > >>> name and share name could be correct, but in the wrong workgroup.   
   > >>>   
   > >>> [1] The error *message* is actually "The network path was not found."   
   > >>   
   > >> We have only one workgroup. One private network with 3 W10 pc's and 2   
   > >> W11 laptops. All W10 pc's can see eachother and open their shares. We   
   > >> can see the 2 W11 laptops, but can't open them.   
   > >   
   > >    The point isn't that you have only one workgroup, but whether the   
   > > workgroup is correctly set on all systems, especially on the two Windows   
   > > 11 laptops, which "don't work" and are apparently relatively new.   
   >   
   > There are many settings on the laptops which I checked, and these are OK.   
      
     You keep saying that, but there must be something set incorrectly,   
   because it used to work and now it doesn't.   
      
     And for example for Paul's  AI generated advice, you say you checked   
   most of it, but you should not check most of it, but all of it.   
      
     As I said before, you have the problem (and the (configuration)   
   information, (error) messages, etc., etc.), we don't, so you will have   
   to do the work, the checking, etc..   
      
     As, like most essential information, you haven't mentioned it: Which   
   shares do you have configured on the Windows 11 laptops and how did you   
   configure them, i.e. the '[Share...]' settings?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)