From: robin_listas@es.invalid   
      
   On 2026-02-02 02:49, Char Jackson wrote:   
   > On Sun, 1 Feb 2026 02:50:03 -0800, T  wrote:   
      
      
   >> I did   
   >>   
   >> [1] a power cycle   
   >> [2] firmware upgrade   
   >> [3] Network reset (its showed up)   
   >>   
   >> All the network setting finally show up.  I configured   
   >> IPv4 for DHCP and turned IPv6 off.   
   >>   
   >> And everyone now prints!   
   >   
   > IMHO, shared network resources, such as printers, should never be   
   > configured to use DHCP to acquire an address. Sooner or later, there's   
   > going to be a problem there.   
      
   I had to set up a home printer to DHCP, using the home router to hand   
   out the address.   
      
   The printer has no display. It is configured using an app on a   
   smartphone. Kind of. The easiest way to give it a fixed address was   
   DHCP, after finding how to print a network report page and find the MAC.   
      
      
      
   --   
   Cheers, Carlos.   
   ES🇪🇸, EU🇪🇺;   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)