From: crwlr@verizon.net   
      
   "Scott"  wrote in message   
   news:pUjAj.330$xr.318@newsfe05.lga...   
   > Hi all,   
   >   
   > I have a strange little problem maybe someone can shed some light on.   
   >   
   > When I fill up my 99 Toy Tacoma V6 and start to drive the check engine   
   > light comes on. So I go to Advance and he says it is a lean problem, and   
   > blames bad gas. So another fillup and the light again which can be reset   
   > by pulling the efi fuse and relay under the hood. I take a trip and the   
   > light comes on by itself without a fill up, any ideas what this might be?   
   > Also truck has a 130000 miles on it.   
   >   
   > Thanks,   
   >   
   > Scott..   
   >   
      
      
   If you go to AutoZone, why don't you use the Reset function of the Scan   
   Tool? This is a far better way of resetting the Check light.   
      
   Lean can be caused by a vac hose that has come loose, or otherwise is the   
   source of a leak.   
      
   Use the Reset function of the tool to be sure you have actually cleared out   
   the codes, and write the codes down first, then write them down again when   
   the light comes back on. Come here and tell us all of the codes that are on   
   BOTH lists.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)