From: mik@localnet.com   
      
   "Randy Tingley"  wrote in message   
   news:13uctv1hbh377ba@corp.supernews.com...   
   > Good morning.   
   > My Taco is throwing a P0136 which is circuit malfunction: Bank1 Sensor 2.   
   > This is the after converter o2 sensor.   
   >   
   > My question is:   
   > I have NOT remove this yet ... maybe this is my weekend project.   
   >   
   > The cord on this sensor looks to be about 4 feet long and goes up thru the   
   > cab.   
   > Do I have to remove the passenger's seat to connect this?  The connector   
   > runs thru the cab under the passenger's seat, or am I missing something?   
   >   
   > Thank you,   
   > Randy   
   >   
   >   
      
      Were the O2 sensor harness passes through the floor there should be a   
   rubber grommet that is part of the harness. Pry that grommet out of the hole   
   from underneath and you should be able to bring the connector out through that   
   hole.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)