From: jpg@gif.com.invalid   
      
   "Mike"  wrote in message   
   news:5FbMj.1529$NU2.354@news01.roc.ny...   
   >   
   > "Joseph Wind"  wrote in message   
   > news:XabMj.3583$bx3.1747@trnddc02...   
   >> I've got a 93' 4Runner SR5 4wd.  One of lug stud on the rear axle is   
   >> stripped.  How hard is it to replace?  Does anyone have links on how to   
   >> take out the wheel assembly?  I have access to a hydraulic press to   
   >> remove and replace the new stud.   
   >>   
   >> TIA   
   >   
   >   
   >   Remove the wheel and brake drum. Pound out the stripped stud with a   
   > hammer. Pull the new stud into place by using a regular nut ( not the lug   
   > nut ) and suitable spacer.   
      
   Can the stud be pulled out from the back without removing the hub?  I   
   thought I would  have to remove the hub in order to replace the stud.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)