From: mfj1952deletethis@cox.net   
      
   On a 1993 toyota pickup, SR5, 4wd, ext cab...the horn is inop.   
   I have a copy of a maintenance manual page (from the net) that   
   shows the horn relay behind the L/H Kickpanel on the drivers   
   side of the cab.  (The horn is inop, the fuse is good, and   
   all indications are from the diagram the logical culprit is   
   the relay).  After removing the kickpanel, I still cannot   
   see exactly where that relay is mounted unless it is behind   
   the fuse/relay box.  Can someone tell me if I am in the right   
   area to replace the relay?  I see one screw at the bottom of   
   that fuse/relay box that might release it from the sidewall,   
   but want to make sure before I start a downhill slide taking   
   things apart I will be able to get parts reassembled again.   
      
   Any help would be appreciated from those who have already   
   crossed this bridge.   
      
   Mike in Kansas   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)