home bbs files messages ]

Forums before death by AOL, social media and spammers... "We can't have nice things"

   alt.autos.toyota.trucks      Toyota thought Gung Ho was a documentary      28,556 messages   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]

   Message 27,505 of 28,556   
   =?iso-2022-jp?q?Hachiroku_=1B$B%O%A to Jeff Strickland   
   Re: Performance Brake Pads and Rotors fo   
   23 Sep 09 17:18:09   
   
   XPost: alt.autos.toyota   
   From: Trueno@e86.GTS   
      
   On Wed, 23 Sep 2009 14:09:46 -0700, Jeff Strickland wrote:   
      
   >   
   > "Hachiroku ????"  wrote in message   
   > news:pan.2009.09.23.18.35.27.328202@e86.GTS...   
   >> On Wed, 23 Sep 2009 08:50:13 -0700, SMS wrote:   
   >>   
   >>> The rotors on my 4Runner need to be replaced because when they heat up   
   >>> they warp and the brakes chatter. This occurs only when driving in the   
   >>> mountains where there's more harder braking than in city driving. The   
   >>> original rotors have been resurfaced once. and that's about it for   
   >>> them.   
   >>>   
   >>> Are there any higher performance rotors that are less likely to warp or   
   >>> fade than the stock Toyota rotors? What are the advantages and   
   >>> disadvantage of drilled versus slotted versus drilled and slotted   
   >>> versus plain? Do all slotted rotors have a left and right?   
   >>>   
   >>> Online I've found:   
   >>>   
   >>> Brembo Sport Rotors (drilled and slotted) $110 each Disc Italia   
   >>> (drilled and slotted) $115 each Disc Italia (slotted) $115 each Power   
   >>> Disc (drilled) $90 each   
   >>> Power Disc (slotted) $90 each   
   >>> X Brakes (drilled and slotted) $62.50 each Power Stop (drilled) $96   
   >>> each Power Slot (slotted) $99 each   
   >>> Power Slot Cryo Slot (slotted) $130 each   
   >>>   
   >>> JC Whitney no-brand listed (drilled) $66 each   
   >>>   
   >>>   
   >>> What about brake pads? What should I get?   
   >>   
   >> What Ray said.   
   >>   
   >> Also check Endless. They specialize in Toyota brakes.   
   >>   
   >> I don't use drilled/slotted rotors because they wear the pads faster,   
   >> however, in your case they might solve your problem.   
   >>   
   >> As for the rears, most Toyta rear drums (if you have drums) are adjusted   
   >> by actuating the e-brake lever/handle. On models with the handle between   
   >> the seats, lifting the handle and lowering repeatedly adjusts the rear   
   >> shoes. The 4-Runner I am not that familiar with.   
   >>   
   >>   
   >>   
   >>   
   > Rear Drum brakes self-adjust by using the parking brake? Are you sure?   
      
   On my 2 Tercels. Pulling the e brake (parking brake?) lever actuated the   
   adjusters.   
      
   >   
   > Back in the days of old, drum brakes self-adjusted when the brakes were   
   > applied while the vehicle was backing up.   
   >   
   > The idea is(was) that the primary and secondary shoes exchange roles in   
   > reverse, and the movement of the shoes pulls a cable that moves a lever   
   > that cranks a cog that holds the shoes spread apart. If the brakes needed   
   > to be adjusted, one simply drove backwards and applied the pedal as   
   > needed. Perhaps one had to repeatedly apply the brakes in Reverse if the   
   > brakes were significantly maladjusted.   
   >   
   > I was not aware that the rear shoes adjust because the parking brake   
   > handle (or pedal) gets used.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   

[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]


(c) 1994,  bbs@darkrealms.ca