In article , Susan (It Started!)   
    wrote:   
   >Thanks to the help I got here, I was finally able to spy the starter   
   >tucked way up behind the wheel well. I used a wooden dowel and a   
   >hammer to give it some love taps, and the truck started right up!   
   >   
   >That's the good news.   
   >   
   >The bad news is I guess I will have to pull it sometime soon to   
   >replace the contacts so this doesn't happen again, right? Or do the   
   >"brushes" get stuck after sitting for 10 weeks like that? What would   
   >you good people recommend?   
   >   
   >I can't thank everyone enough for their support, tips and input. I   
   >have learned so much that I'm sure will come in handy. I turned the   
   >truck off, as from messing with the alarm wires, the jkeyfob won't   
   >control the power locks now, so I need to figure that out, and clean   
   >my little Tonka Toy, then take it for a ride. I hope when I go to   
   >start it, it starts right up until I get a chance to do whatever needs   
   >doing. :)  YAY!! I'm so happy.   
   get a diagram and see. if it has mechanical parts, some switch cleaner may   
   help.   
   but get all the fobs right first!   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)