REPLY: 1:153/757.0 165de4f5
MSGID: 1:105/10 6439493e
CHRS: UTF-8 2
TZUTC: -0700
Greetings Alan!

Wednesday April 12 2023 09:29, you wrote to me about an urgent matter!:

 >> If this has been covered previously I apologize, I was finally able
 >> to purchase aftershock and trying to give it a go here this morning.
 >> When I poll my uplink I get "Remote rejected provided password you
 >> must support MD5" Now I know the password is correct, and I do have
 >> binkd on my system using md5 does aftershock have a place for me to
 >> enable that and I missed it, or?

 AI> It sounds like your uplink is forcing MD5 connections. I don't think
 AI> AfterShock supports MD5 currently.

 AI> Are you running the system your AfterShock is connecting to?

 AI> If it's a Mystic System set MD5 to no, or yes but not forced.

 AI> If it's a binkd system don't start binkd with -md5 but use that on the
 AI> node lines when you know MD5 is supported.

I switched it off and now aftershock connects just fine.. Will now see if I
can get it to pass mail back and fourth

----
Regards,


 Rick Smith (Nitro)

... Wildcat! is to BBSing what an Etch-a-sketch is to ART!
--- GoldED+/LNX 1.1.5-b20220504
 * Origin:  ----> Abacus BBS! --->>>>bbs.abon.us:2323  (1:105/10)
SEEN-BY: 1/123 15/0 90/1 105/7 10 11 44 81 85 500 106/201 123/131
SEEN-BY: 129/305 153/7715 218/700 226/30 227/114 229/110 112 113 206
SEEN-BY: 229/307 317 424 426 428 470 550 664 700 266/512 282/1038
SEEN-BY: 317/3 320/219 322/757 342/200 396/45 460/58 633/280 712/848
PATH: 105/10 81 229/426