From: gangrif@mindless.com   
      
   No, its an older setup, the NIC is PCI.   
      
   Corey wrote:   
   >   To: Nathan   
   >   Re: Vircom Major TCP issues   
   >   By: Nathan to alt.bbs.majorbbs on Sun Jul 18 2004 10:12 pm   
   >   
   >  > Hey everyone.   
   >  >   
   >  > Ive recently dug my old BBS software out of the closet, and decided to   
   >  > re-build my bbs.   
   >  > I need to start from scratch, so im starting with installing (of course)   
   >  > the bbs software itself.   
   >  > WG 2.0.   
   >  > This will be a telnet only bbs, so i also installed Vircom's MajorTCP/IP.   
   >  > After the install, and i configure everything, i get an error when i try   
   >  > to run the bbs, it says:   
   >  > TCPLIB ERROR # 0xA  accessing packet driver   
   >  >   
   >  > now, the packet driver IS resident, on 0x60   
   >  > and the hardware config options are set to the proper address for the   
   >  > packet driver.   
   >  > so whats the problem?   
   >  > Any suggestions?   
   >  >   
   >  > Thanks.   
   >  >   
   >  > --- Synchronet 3.11c-Win32 NewsLink 1.76   
   >   
   > you have a netcard on the motherboard?   
   > some program don't see builtin motherboards. try a PCI netcard.   
   >   
   > "this message posted on entirely post consumer recycled electrons.."   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)