From: gangrif@mindless.com
Thanks, but i'd already found a solution. Maybe the module was
disabled, and thats what caused the problem. What i ended up doing was
copying a few of the vircom module files (those dedicated to FTP) from
my test bbs install into the live bbs install. It added the
functionality right in.
It may have been gone because it was disabled though. Perhaps that was
an easier solution.
Thanks anyway.
Joe Cronin wrote:
> Check the offline configuration options that enable and disable
> modules. You will find the tcpftpd option disables.
>
> Joe
>
>
> On Thu, 21 Dec 2006 23:40:37 GMT, "Corey"
> wrote:
>
>> To: Nathan
>> Re: Wg2.0, Vircomm TCP/ip, FTP server?
>> By: Nathan to alt.bbs.majorbbs on Thu Dec 21 2006 01:43 pm
>>
>>> In the past, I've had WG configured such that it served www, ftp, and smtp.
>>> I dont really have a need for www, and smtp, but curently it'd be nice
>>> if i could FTP in, just as sysop (or some other user), to transfer some
>>> files to another machine.
>>> So i went to connect to ftp to see what i had access to, and i found
>>> that it wasnt running, or at least not accessible remotely.
>>> So i took a nice trip through CNF and did not find any options that
>>> allowed me to enable FTP.
>>> The board runs WG2, on DOS, and has VirComm's TCP/IP package installed.
>>> From what i can tell in CNF (and what i remember from when i set the
>>> whole thing up) Vircom takes away the tcp/ip functionality from the WG
>>> and handles it through the Vircom package.
>>> Does this mean that FTP is not available? Or am i just missing someting?
>>>
>>> Thanks for any help!
>>> --
>>> In a world with no fences, why do I need Gates?
>> err you would config it thru whatever package handled it.
>> not sure of the exact file thou.
--
In a world with no fences, why do I need Gates?
--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)
|
