From: nospam.g00r00@f215.n129.z1.fidonet.org   
      
    EW> I'm still trying to figure it out.  If I set in the configuration to use   
    EW> CP437, the ansi is ok.  But when I log in via ssh/telnet, I need to set   
    EW> the terminal program to use CP437 as well.   However, the ANSI is still   
    EW> screwed up regardless of which setting you use when you log in using   
    EW> netrunner (nr21 version).   
      
   Are you using the default ANSIs or have you created new ones?  Some of this   
   could depend on how the ANSIs are saved.   
      
   There are three settings for character translation, one for the local UI and   
   two used for each user when a connection is established.   
      
   The local UI setting is in System Configuration> General settings.  When Mystic   
   is installed it should give you a quiz so it can determine what that setting   
   should.  When you run "./mystic -l" (make sure you have the -l) the ANSI should   
   look normal.  If it does not, try changing it.   
      
   The second settings are in the Login/Matrix setting.  The "default codepage"   
   setting is what Mystic defaults to for each user that connects.  Almost always   
   you'll want this set to CP437.  Then there is the "Ask Codepage" setting which   
   can be set to "Detect" "Ask" or a specific codepage.  You can try setting that   
   to Ask to experiment with it but you can probably keep it on Detect unless you   
   are having issues.   
      
   ... Light year: 1/3 less calories than your regular year   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)