From: nospam.g00r00@f215.n129.z1.fidonet.org   
      
    MD> I spent quite a while in communications with my uplink yesterday and I   
    MD> think we have it figured out.   
    MD>   
    MD> My Fido Hub is 3:640/1321  so the only routing info I have for it is 3:*   
    MD>   
    MD> I then created a new one I called: Fidonet NC   
    MD> using an address of 1:135/0 and the Route Info is: 1:* 2:* 4:*   
    MD>   
    MD> It seems to be working quite well.   
      
   Just want to reiterate to others who may see this to avoid any confusion:   
      
   Avon's videos will still work for you but are slightly outdated in terms of   
   echomail setup these days.  Mystic has changed in A47 and A48 specifically to   
   simplify this with a better default install and automatic routing.   
      
   To connect to FidoNet with Mystic A47 (and even moreso in A48 because it has a   
   slight adjustment to its automated routing logic specifically for FidoNet) all   
   you have to do is:   
      
   1. Set your echomail address in EchoMail Addresses configuration   
   2. Configure the connection to your hub in EchoMail Nodes (no need to touch   
   routing configuration unless you have very specific requirements).   
   3. Enable the echomail events in your Event editor   
   4. Enable/configure the BINKP server if you wish to have a full time mailer   
   running.   
      
   Everything else should just work.  You don't have to touch routing, or create   
   .ini files or anything like that these days unless you have a very specific   
   reason to!   
      
   ... Electricity is really just organized lightning.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)