INTL 1:1/130 1:129/215   
   REPLYADDR nospam.g00r00@f215.n129.z1.fidonet.org   
   REPLYTO 1:229/2.0 UUCP   
   MSGID: 1:129/215.0 c363b498   
   REPLY: 1:124/5014.0 4e5b4e46   
   PID: SoupGate-Win32 v1.05   
   From: nospam.g00r00@f215.n129.z1.fidonet.org (g00r00)   
   Newsgroups: alt.bbs.mystic   
   Subject: Re: Donations   
   Date: Wed, 11 Jan 2023 20:20:40 +1300   
   Organization: Agency HUB, Dunedin - New Zealand | bbs.nz/#Fidonet   
   Message-ID: <3278091416@f215.n129.z1.fidonet.org>   
   Mime-Version: 1.0   
   Content-Type: text/plain; charset=us-ascii   
   Content-Transfer-Encoding: 8bit   
   Injection-Info: news.bbs.nz; posting-host="8IWYKlztXHa0+   
     IViEdY46zrq8kpk7dC9fTbT74JiSDQ"; logging-data="3141"; mail-complaints-to="   
     abuse@news.bbs.nz"   
   User-Agent: VSoup v1.2.9.47Beta [95/NT]   
   X-MailConverter: SoupGate-Win32 v1.05   
   X-Comment-To: Zazz   
   X-Received-Bytes: 2604   
   From: nospam.g00r00@f215.n129.z1.fidonet.org   
      
    Za> I am having a problem with my current Mystic setup (I think a 48 July 22   
    Za> First when I am in message area I press p for post and instead of   
    Za> default to  All it defaults to Access denied *all in read)  I looked in   
    Za> ini files and  config but did not find out.  Any I ideas? where to look   
    Za> to correct this?   
      
   My guess is its probably this:   
      
    + The default value for the "To:" field when posting a message is now   
      configurable on a per-theme basis.  The value of prompt #104 will now be   
      used as the default for the To field.  If you've never modified this then   
      you don't have to do anything but you may need to reset it to default in   
      the prompt editor otherwise.   
      
   You'll want to go into you prompts and reset it to default (prompt #104) or set   
   it to "All".  Mystic should update all of this on its own unless it was   
   customized (assuming the new prompt.dat is replaced when upgrading each time).   
      
    Za> Next is the File Area.  When I press V to view a file it displays   
    Za> contents of  zip file.  But it does not view individual files test or   
    Za> ansi.   
      
   I think that might depend on your archive configuration.  If the new install of   
   A48 works and you haven't modified your archive settings then you could try to   
   take the archive.dat from the new A48 and copy to your BBS's data folder.   
      
    Za> I was thinking of install your A48 and copying my data files over for a   
    Za> fresh  start.  Not sure that will work for whats wrong my current setup   
    Za> I may copy over bad config stuff and have same problem.   
    Za>   
    Za> What do you recommend?   
      
   Either should be ok.  I can help you work out the issues or you should be ok to   
   copy data over as well.   
      
   ... Isn’t it a bit unnerving that doctors call what they do "practice"?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   
   SEEN-BY: 229/2 400 426 700 282/1038 317/3 340/400 770/330 900/102   
   PATH: 229/2 426