INTL 1:1/130 1:124/5014   
   REPLYADDR nospam.Zazz@f5014.n124.z1.fidonet.org   
   REPLYTO 1:229/2.0 UUCP   
   MSGID: 1:124/5014.0 461e9e26   
   REPLY: 1:129/215.0 c363b498   
   PID: SoupGate-Win32 v1.05   
   From: nospam.Zazz@f5014.n124.z1.fidonet.org (Zazz)   
   Newsgroups: alt.bbs.mystic   
   Subject: Re: Donations   
   Date: Thu, 12 Jan 2023 16:38:27 +1300   
   Organization: Agency HUB, Dunedin - New Zealand | bbs.nz/#Fidonet   
   Message-ID: <1176411686@f5014.n124.z1.fidonet.org>   
   Mime-Version: 1.0   
   Content-Type: text/plain; charset=us-ascii   
   Content-Transfer-Encoding: 7bit   
   Injection-Info: news.bbs.nz; posting-host="8IWYKlztXHa0+   
     IViEdY46zrq8kpk7dC9fTbT74JiSDQ"; logging-data="3664"; mail-complaints-to="   
     abuse@news.bbs.nz"   
   User-Agent: VSoup v1.2.9.47Beta [95/NT]   
   X-Comment-To: g00r00   
   X-MailConverter: SoupGate-Win32 v1.05   
   X-Received-Bytes: 2461   
   From: nospam.Zazz@f5014.n124.z1.fidonet.org   
      
    g0>  Za> First when I am in message area I press p for post and instead of   
    g0>  Za> default to  All it defaults to Access denied *all in read)  I looked   
    g0>  Za> ini files and  config but did not find out.  Any I ideas? where to lo   
    g0>  Za> to correct this?   
    g0>   
    g0> My guess is its probably this:   
    g0>   
    g0>  + The default value for the "To:" field when posting a message is now   
    g0>    configurable on a per-theme basis.  The value of prompt #104 will now   
    g0> be    used as the default for the To field.  If you've never modified   
    g0> this then    you don't have to do anything but you may need to reset it   
    g0> to default in    the prompt editor otherwise.   
    g0>   
    g0> You'll want to go into you prompts and reset it to default (prompt #104)   
    g0> or set it to "All".  Mystic should update all of this on its own unless   
    g0> it was customized (assuming the new prompt.dat is replaced when   
    g0> upgrading each time).   
      
   It was the prompt   
      
    g0>  Za> Next is the File Area.  When I press V to view a file it displays   
    g0>  Za> contents of  zip file.  But it does not view individual files test or   
    g0>  Za> ansi.   
    g0>   
    g0> I think that might depend on your archive configuration.  If the new   
    g0> install of A48 works and you haven't modified your archive settings then   
    g0> you could try to take the archive.dat from the new A48 and copy to your   
    g0> BBS's data folder.   
      
   I copied all the ini files from themes\defaul\text folder and that fixed it   
   apparently there were some missing   
      
   Ruben Figueroa aka Zazz   
   Mystic Prison Board Sysop   
   telnet://pbmystic.rdfig.net:24   
   Web: www.rdfig.net   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)   
   SEEN-BY: 229/2 400 426 700 282/1038 317/3 340/400 770/330 900/102   
   PATH: 229/2 426