On Friday, February 12, 2016 at 8:06:27 PM UTC+13, John Robertson wrote:   
   > On 02/11/2016 6:37 PM, pinball_10@clear.net.nz wrote:   
   > > On Friday, February 12, 2016 at 1:55:01 PM UTC+13, John Robertson wrote:   
   > >> On 02/11/2016 11:14 AM, pinball_10@clear.net.nz wrote:   
   > >>> Good day! :)   
   > >>>   
   > >>> I am seeking a right side cabinet gas strut for a Rowe CD100A. I require   
   the strut complete with mounting brackets either end. Anyone?.   
   > >>>   
   > >>> Ta! :)   
   > >>>   
   > >>   
   > >> Check with your local car parts shop. These are used in hatchbacks, rear   
   > >> windows, etc. and it should be fairly easy to find a substitute.   
   > >>   
   > >> John :-#)#   
   > >>   
   > >> --   
   > >   
   > > Thanks John! :)   
   > >   
   >   
   > Take the side that is working (prop up the lid with a 2X4) and you   
   > should be able to find all the fittings, etc.   
   >   
   > I was successful doing that a number of years ago.   
   >   
   > As far as I know if they are the same length, then they are the same   
   > strength - but I could be very wrong, be sure to ask someone who knows   
   > about gas struts!   
   >   
   > John :-#)#   
   >   
   > --   
   > (Please post followups or tech inquiries to the USENET newsgroup)   
   > John's  Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9   
   > (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)   
   >                       www.flippers.com   
   >         "Old pinballers never die, they just flip out."   
      
      
   I will do. God bless you! :)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)