From: gl@me.com   
      
   Dominic Tiberio  Wrote in message:   
   > Thanks again, I haven't been able to take it all apart to check the IC yet.   
   I do have one question though, I have unplugged the IR module and the External   
   speaker from the amplifier and the red "Mute" LED is still lit. How do I turn   
   that off? I can't    
   seem to find any docs or info on the compact amplifier that is in my unit   
   anywhere online.   
   >   
      
   Dom,   
   Check to make sure ur unit isn't affected by the bad transistors.   
    If it is there are a couple on the scc responsible for receiving   
    toc info. You can check at appropriate connections in interface   
    box to look for toc pulses when juke is trying to read the cd. If   
    u get pulses there then player, optocoupler and cd control are   
    probably ok. Sopposedly mute is controlled by k6 switch, i think.   
    You probably have I-84 amp. Johns site does have some info, check   
    his file that says "not for early 90's". It also has 22 in the   
    title. I have a bunch of docs that should be applicable to cdm3   
    based units, especially if ur scc is the 2500 model as u   
    indicated earlier. I have late model cdm4s which is very similar   
    to cdm3. In fact I had to use a combo of cmdm3, cdm4s and   
    cdm12/pro doc to get a good idea of what my unit has. Let me know   
    ifwhat u need and I'll ty to help.   
      
   Greg lentz   
   --   
      
      
   ----Android NewsGroup Reader----   
   http://usenet.sinaapp.com/   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)