From: mperva@kcud229.org   
      
   Hello All:   
      
   I am restoring a Wurlitizer 1700 and I need to ask a few questions.   
      
   I have rebuilt all the mechanical parts and am wondering if there is a way to   
   test the record changer assy to make sure I have it put together correctly.   
   Can I run it with power? I want to not break any teeth on the gears or   
   anything else. I cant put it    
   into the cabinet because that will lead to question 2.   
      
   The cabinet suffered some water damage and I will have to replace both sides   
   of the cabinet. One side is so warped and twisted that it not fixable or   
   usable for a template. The other side is better, but I was wondering if anyone   
   might have a template of    
   the sides. I am also open to other ideas on remaking these.   
      
   Any help will be great.   
   Thanks   
   Mike   
      
   --    
   *The information contained in this transmission may contain privileged and    
   confidential information. It is intended only for the use of the person(s)    
   named above. If you are not the intended recipient, you are hereby notified    
   that any review, dissemination, distribution or duplication of this    
   communication is strictly prohibited. If you are not the intended    
   recipient, please contact the sender by reply email and destroy all copies    
   of the original message. To reply to our email administrator directly,    
   please send an email to admin@kcud229.org *   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)