596694e3   
   From: tony.miklos@gmail.com   
      
   wayne wrote:   
   > Hi, i have a ami model b, which will not reject,   the mech got stuck,   
   > i freed it up, and now the micro switch will not reject the record,   
   > nor will the reject button on the back of the machine work,  i have a   
   > manual, but no help in the trouble shooting section on this prob,   
   > Any suggestions would be apprectiated, thanks   
      
   If one of the micro switches is faulty the motor will run further than   
   it's normal range and get stuck there until you turn it out again by   
   hand.  I *think* it's one of the switches in the front of the moving   
   mech.  One that a selected record pin is tripped with.  Some of them are   
   tough.  You are very lucky if you can find a new switch.  Like most   
   people, I take the switch apart and rebuild it.  Careful not to loose   
   any tiny flying parts, open it up inside a box that may catch a flying   
   spring.   
      
   I suppose I should mention these switches could be out of adjustment.   
   I've never had one with that problem that didn't need the switch   
   rebuilt.  An adjustment may make it work for a short while, but usually   
   not for long.   
      
   Tony   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)