From: flashbk13@hotmail.com   
      
   hi all,   
   I have a ground fault problem. If plugged into a ground fault receptical, it   
   will pop the fault button it I try to use any of the mechanism logic. If I run   
   the carousel directly (engage the indexing plunger) it runs ok, but if I try   
   the start relay, left    
   or right transfer relays, or lift up the popularity meter window cover lever,   
   it trips the wall outlet. The fuses in the machine or the house circuit   
   breaker do not blow/trip. This would explain why the ground blade was cut off   
   of the cord. I installed a    
   new plug (wired correctly) and have this problem. I have NOT tried using a   
   regular wall socket. I am still unfreezing motors.   
   Also, any thoughts on why one castor goes up into the socket higher than the   
   rest? It looks ok from the outside. I swapped around the other castors to that   
   location, the same problem, so at least I know all the castors are the same   
   size. So that socket    
   has some kind of problem. Thank you, Rick.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)