From: flashbk13@hotmail.com   
      
   hi all again,   
      
   While I was in the speaker compartment discovering that castor problem, I   
   noticed there is no horn spkr here and no crossover either. In fact, I don't   
   see evidence there was either as i see no holes. Did the C not have the hi Hz   
   setup? The 15" woofer has    
   a whizzer cone . The spker board does have the cut out slot for the horn. The   
   C manual (which goes along with the B for completeness) does not list   
   anything, but the B manual  lists the hi and low and crossover network. The 2   
   wires from the amp (which    
   are connected to my one spkr) would go to the UCN1 which then comes out as 4   
   wires for the 2 spkrs. Anyone have thoughts on this? I can easily add the horn   
   and crossover.  Thanks, Rick.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)