From: flashbk13@hotmail.com   
      
   Hi all,   
   The UPC seems to be the first model that came from the factory that was   
   grounded (its in the schematics and the service receptical is also a 3 blade   
   grounded). So, I freed up all of the motors and its starting to come to life   
   😲, of course I had to    
   plug it into a normal 3 blade grounded wall outlet, as it will not stay on if   
   I use the ground fault outlet.   
      
      I still need to keep cleaning and lubing. Need to go thru all of the relay   
   contacts as some functions occasionally work (like the credits). I can select,   
   the machine goes thru the motions, but does not punch a pin and the carousel   
   gores around once    
   then stops. BUT if I manually select a pin, it will load and play the proper   
   record and put it away. So its coming along. Maybe as i go thru it, i'll find   
   the ground fault (Ron, It does seem to be in the 24V circuit as the mech. is   
   in that circuit).     
   Rick.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)