From: ibuypinballs@gmail.com   
      
   Have an issue with a V200 drum. The drum operates fine except for the very   
   left selection button. When selecting the far left button the motor for the   
   drum spins very slow and does not extend all the way out to engage the clutch   
   to move the drum is    
   almost like the circuit for that selection has to much resistance in it. Some   
   times it will chatter and then work. I replaced the far left arrow switch with   
   an NOS one I had. I cleaned the two switches at the right side of the drum, I   
   know the one is a    
   motor switch. All other 4 arrow selections operate the motor very strongly.   
   Any ideas, Thanks in advance.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)