From: zarco@sonic.net   
      
   Hi Guys,   
   Hate to admit it but I'm stuck (sic) and could use some advice.   
   My 1650 selects a record normally, plays it but when the   
   record is over the spindle only drops maybe 2/3 of the   
   way down. When the record tray tries to retract it jams   
   because the spindle is in the way.   
      
   The spindle shaft (very long) moves freely and is not sticking.   
   The arm that pushes the spindle shaft up/down is not going   
   down all the way. I can force it down all the way but I'll   
   be fighting spring tension to do so. This just isn't right.   
      
   I have verified that all springs are in place and not broken. The   
   cam follower appears to be riding in the correct track, but this   
   is almost impossible to see. The cam goes through its full   
   cycle if I remove the jam. Doesn't seem to be any sort of adjustment   
   for this.   
      
   Any suggestions???? TIA   
                             Steve   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)