From: big.paolone@gmail.com   
      
   Thanks John,   
      
   the gripper motor and the magazine motor are ok because i have cleaned and   
   greased them last year when i restore my 484. I have turn easily right and   
   left on both the motors.   
      
   i supect as you the microswitch, because if i remove the connection of the   
   gripper motor when the record start to play it continue to play normally. (in   
   one try i forget to remove it and the 484 stops, so i remove the connection   
   and i push the red    
   circuit breaker button and the recond continue to play normally).   
      
   But at the end of the disk the gripper arm don't pick up the disk anymore even   
   if i insert the connection of the gripper motor.   
   So (after i have insert the gripper motor connection) i have to use the scan   
   switch (slow down to cancel position and then up to oprate position) to let   
   the gripper arm put the record in the magazine.   
      
   Wich microswitch is broken and do i have to check?   
      
   Thanks   
      
   Paolo   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)