From: cathyator@gmail.com   
      
   On Saturday, September 5, 2020 at 11:32:25 PM UTC-5, Wayne B wrote:   
   > Hi all,    
   >    
   > It's been a while since I've posted here. I hope everyone is doing well and   
   enjoying their Jukes more than ever during these times.    
   >    
   > After ignoring, and not playing my G for quite a while, I decided to tackle   
   the issue that caused be to walk away from it for a bit.    
   >    
   > If the juke is playing, ll seems fine as long as there are selections   
   selected, but upon initial start and often after the final selection plays and   
   stops, if I make a selection, the record last played will be put back in the   
   rack, the motor keeps    
   spinning and the mech does not scan. If I then manually change the reversing   
   switch direction to pick up a "B" side and flip the clutch latch lever, the   
   carriage will scan and pick the next records.    
   >    
   > I'm sure there are no new problems that haven't been seen before, this seems   
   like a strange one to me.    
   >    
   > Any suggestions?    
   >    
   > TIA    
   > -Wayne   
   Just guessing, if the clutch wasn't cleaned properly, and that usually means   
   removal to do, then that is where I'd start looking.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)