From: Tony.Miklos@gmail.com   
      
   On 11/29/2010 7:36 PM, chris linhardt wrote:   
   > 'Tony Miklos[_2_ Wrote:   
   >> ;663174']On 11/28/2010 5:19 PM, chris linhardt wrote:-   
   >> The one the three are not working. it goes right into reselect mode.   
   >> Could this be a bad selector? The wires between there and the black   
   >> box   
   >> are good. Also the 7 reads sometimes but sometimes reads as a   
   >> different   
   >> number. Can you buy these selectors? if so where? Thanks in advance   
   >> Chris-   
   >>   
   >> I normally disassemble the switch assembly and clean it and it works   
   >> fine.   
   >>   
   >> Tony Miklos   
   >> Eastern Tennessee   
   >   
   > Tony what do you clean it with? thanks you are the man. I have taken it   
   > apart and cleaned it but dont know what to use and not use. Chris   
   >   
      
   They are gold plated so go easy on them.  You can use cotton Q-tips   
   dipped in rubbing alcohol.  Be sure not to leave any cotton in them.   
   Some of the contacts may need a little adjustment so they make better   
   contact with the circuit board.  While you are there, clean and adjust   
   the other contact on the side of the assembly.   
      
   Tony Miklos   
   Eastern Tennessee   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)