3ffc36cd   
   From: gswanson16@cox.net   
      
   Did it burn and smoke or does it just blow fuses?   
   The transformer on my VL200 was blowing fuses and it turned out to be a   
   sharp solder joint that vibrated   
   through the paper between layers of wire and I was able to fix it.   
   You have nothing to lose by trying to take it apart a little to see what you   
   can see.   
      
   Glen   
      
   "jimw"  wrote in message   
   news:9227bc8f-613d-4bd9-b259-267934105d57@m7g2000vbc.googlegroups.com...   
   ----also posted to yahoo seeburg group   
   Hi all,   
   It looks like my restored Seeburg 147 Trashcan just became the latest   
   victim of the old Seeburg power transformer barbeque! Amp & WSR1   
   Receiver were rebuilt several years ago, tubes and caps still test   
   good so I’m not sure what put the power transformer over the edge. I’m   
   wondering if any of you have a used one (that’s not shorted) that you   
   want to sell or if anyone has come up with a way to provide the   
   necessary secondary voltages using multiple transformers on an   
   external chassis? Maybe I’m just dreaming but it seems like there must   
   be a work around substitute to get the needed voltages…….I don’t want   
   to re-invent the wheel if someone has already done it. Any thoughts or   
   help would be much appreciated.   
   ---Jim   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)