From: dtucker4@bigpond.com   
      
   AMI Rowe R1-2 Fantasia/Cantebury model.   
   Sorry, I got the I and the 1 mixed up, would like any feedback or   
   suggestions you could offer also.   
      
   Merry Christams!   
      
   Cliff   
      
   "Alan Hood"  wrote in message   
   news:Alan.Hood.a0d531f@collectingbanter.com...   
   >   
   > Cliff Tucker;690012 Wrote:   
   >> Hello again people,   
   >> I would like to start by thanking Kreed for the last post response, it   
   >> sorted my problem and its playing nice.   
   >> But...A couple of little annoying things,   
   >>   
   >> 1. It sometimes doesn't want to play selections 101-120 or so. Any   
   >> selection   
   >> after usually works fine. When you select  say 101, it goes off and   
   >> plays   
   >> 185 instead, seems to have a pattern to it playing the same record   
   >> number   
   >> each time, sometimes its the immediate next record. Sometimes does the   
   >> search and then just goes to its home position and plays nothing.   
   >> The digits register on the display correctly so Iam thinking maybe the   
   >> encorder or the memory unit are fowling up somehow.   
   >> 2. It sometimes (after playing a slected record) goes off and does its   
   >> own   
   >> thing playing records at random sometimes selecting non-existant records   
   >> in   
   >> the in-between gaps on the selector.   
   >>   
   >> I have checked the continuous play switch (20mins 40 mins etc) and its   
   >> set   
   >> to off.   
   >> I think the memory unit on this. I will probably replace the pin headers   
   >> and   
   >> sockets connecting the encoder to the memory unit and see how it goes.   
   >> All   
   >> LED's sequences are indicating correctly going off the manual.   
   >> 3. I get a pop noise, when the record finishes, its like the mute relay   
   >> is   
   >> kicking the sound a little too late after the needle lifts off the   
   >> record at   
   >> its end.   
   >> Probably an adjustment on a switch or is this normal? If its a switch,   
   >> which?   
   >>   
   >> Otherwise, its working great. I have the manual now and its a re-print   
   >> and   
   >> doesn't include the section on the encoder alignment :( and I really   
   >> want to   
   >> get in and oil it in the right places and tune it up, it deserves it.   
   >> The   
   >> manual I think is very good, it also shows how to solder components and   
   >>   
   >> remove IC's, test transistors and the like, didnt expect so much detail   
   >> like   
   >> this in a manual like this.   
   >> I hope you guys can help.   
   >>   
   >> Regards all and a Merry Juke-Box Party Christmas.   
   >>   
   >> Cliff   
   >   
   > Hi Cliff,   
   >   
   > What is the jukebox you are having problems with? it can not be a TI-2   
   > which uses letters and numbers.   
   >   
   > Regards   
   > Alan Hood   
   > ami-man   
   > UK   
   >   
   >   
   >   
   >   
   > --   
   > Alan Hood   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)