Copy: spam@flippers.com   
      
   Thanks John,  I found that site while searching around but I won't have time   
   to order one.  I need to pick the machine up tomorrow at 4pm....and I don't   
   want to wait and miss the deal.  I figured if I drill the lock but don't go   
   too deep I'll save the    
   connecting screw at the end that goes to the linkage and latch bar and I   
   should be able to jam a screw driver in the lock hole and turn it open.  At   
   least that's my plan so far.  I'm bringing a long steel rod too as a back up   
   plan.  I'm thinking of going    
   in through the hole in the back where speaker wires come out.  There is a wire   
   cover there that i think I can slide open and reach in with the rod to lift   
   the latch bar.  Any more opinions?  I'm in New Hampshire.   
      
   Thanks, Nate   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)