So the new Bubbler is up and running and I noticed it sounded a little odd.    
   It seems I have no sound coming from the left channel cabinet speakers. It's a   
   1999 with orange componets. All indicator leds on the amp point to everything   
   being ok there.     
   Fuse leds are lit and the speaker short outputs leds are all off.  Paging and   
   computer leds are on on.  I checked with a meter for broken wires from amp to   
   crossover board and from cossover to speakers and they all check out fine.  I   
   swapped wires from    
   left to right and the left speaker works so its not a speaker problem.  Left   
   wires on right speaker and still no sound. I checked balance setting for   
   internal amp and it is centered.  Tried resetting internal amp settings and   
   that did not work.  If I    
   hook up external speakers those work fine and balance settings work on those   
   too.  Does anyone have some advice as to where or what I should check next.  I   
   would think since the amp leds indicate everything is fine could it be   
   something on the crossover    
   board causing the issue?  Any ideas would be greatly appreciated.   
      
   Thanks, Nate   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)