On Monday, December 31, 2012 12:44:09 PM UTC-5, robsher...@msn.com wrote:   
   > Yes it worked when I got it, it worked fine.    
   >    
   > The reason I bought this unit at a higher price was I bought it from   
   Craigslist locally, I figured I would save money from shipping costs by just   
   getting it myself.   
   >    
   > When I got the machine, the cancel scan switch worked, and when you turned   
   the machine on, you could just press the buttons and get your music to play.   
   >    
   > After I loaded my CD's into it, and ran initialization, nothing worked. The   
   scan switch did nothing, and when you turned the machine on, the CD rack   
   would  spin, and random CD's would get plucked and put on the player. And you   
   would get error messages    
   on the read-out.I did have about twenty burnt CD's, but that has been reduced   
   to fifteen, and the machine does recognize them.   
   >    
   > Now after replacing the CCC, I no longer get error messages on the read out,   
   but the only time I can play a song is when the jukebox is in initialization   
   mode. And the only time I can get it into initialization mode is when I start   
   by using factory    
   defaults.    
   >    
   > I think there is a short somewhere, but I can not figure out where it could   
   be. As I stated it has new MCC and CCC, so the problem has to be somewhere   
   else, and think it is either a short, or mechanical.   
   >    
   > And the machine is a Rowe AMI CD-100B Laserstar   
      
   play with service sw a bit i still feel theres  were the trouble might be,   
   folllow wires from it and make sure they are all on  right pins  and that plug   
   you side io is not missing  any connectors  the make contact with those pin,s   
   the scan and cancel works thur ser sw   
   good luck and a happy new year   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)