On Monday, January 7, 2013 6:58:25 AM UTC-5, robsher...@msn.com wrote:   
   > What is the purpose of the optical sensor in a Rowe AMI CD100 Jukebox.   
   >   
   > I think this is my problem. I have replaced the CCC and I no longer get   
   error messages, but the CD holder continues to rotate when the machine turns   
   on, and does not load the CD when the selection is chosen.   
   >   
   > I have checked all the voltages on the CCC, and MCC, and they are correct. I   
   have had the MCC tested, and it is fine.   
   >   
   > The manual says that the problem says it is either the optical sensor, or   
   the wiring. Does this sound plausible, if so I will replace the optical   
   sensor. Also how difficult is it to replace a sensor, and how is it done?   
      
   you should also try cleaning opic   with q tip  they do get dirty, you know if   
   it working by looking to see if home light flashes   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)