8829c382   
   On Jan 15, 5:22 pm, robsherwood...@msn.com wrote:   
   > I bought the CCC refurbished from an online repair shop. Sent the MCC to the   
   same place, to have it tested, the gentleman told me that it was working fine.   
   > The man was highly recommended online so I am pretty sure he knows what he   
   is talking about.   
   > I do notice that the Board ERR light on the MCC is lit if the Jukebox is not   
   scanning. So I am wondering that even if the board tests well for him in the   
   shop, if it could still be acting up in my machine.   
   > I do have the volume up to where the machine plays music, so I know the   
   volume is there.   
   > Now there is a button above the volume control, I have no idea what it does.   
   I have pressed the button, but noting seems to happen.   
   > I am sure the CD player is good, as the machine will start to cycle when it   
   turns on, and that is independent of the CD player. Also the CD's always play   
   when they are to be played on the player. (If the CD's get placed and spin,   
   they will play). And    
   it will initialize them when you run initialization.   
      
   1st when you turn on jukebox it should not scan unless there are plays   
   still up  press or your press scan button the button in back is cancel/   
   reject button ,  , make sure all your plugs are in right slots a few   
   can be put on wrong  , i feel for you your already in this box for 2x   
   what its worth working  and what ever you spent on ccc replacement   
   which you might not have needed,  when you move into service mode does   
   it say errors exist? , rowe are best boxes  out there and it should   
   have been a easy fix, what player is in it is it a cdm ? pro?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)