dddf2bca   
   On Jan 15, 9:30 pm, robsherwood...@msn.com wrote:   
   > Pressing the cancel button does nothing. When I first got it the button   
   worked, but not now.   
   > When I first got the jukebox a couple months ago it worked okay. But after   
   loading my CD's into it, and running initialization it just stopped working   
   correctly.   
   > I was getting "Errors Exist" on the digital readout before I put the new CCC   
   into it, so I figured something must have happened to it. I do not get error   
   messages at all on the readout, unless I reset factory defaults, but then the   
   error message is    
   that I have it set for factory defaults, so I clear that, and I get no error   
   messages.   
   > The player is a pro.   
   > I have checked all my connections and they are tight, and in the right   
   plugs. Pressing the reject button does nothing. Could the MCC be bad even   
   though it tested good at the shop? I don't mind putting a little more into it   
   (a new MCC will cost me about    
   $125.00) if I can get this thing working.   
      
   is there a local vending co in your area ?  if so a smaller guy might   
   help you out for free  shame to waste 125 on something you might not   
   need , your already 2 deep in on it  ,, if you find a guy that will   
   help you just unplug and take your mech to him for a fast test ,  i,ll   
   betting your ccc was ok  the guy might have just cleared errors  or   
   swaped good for good   
   try local vendor  tell him if you have any pals who need a juke you,ll   
   send to him   
   again good luck   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)