d037e360   
   On Feb 1, 5:31 pm, robsherwood...@msn.com wrote:   
   > Maybe found out why the MCC keeps going out. (Might have been my fault) Tell   
   me if this makes sense. On the MCC there is a jack P9, in talking to the man   
   that has been helping me, I mentioned that the plug is very loose on it. He   
   asked me WHAT PLUG ???   
   I told him the one with two white wires, and two black wires. He told me that   
   this is the plug for the counters, and the P9 is the jack for the bill taker.   
   I thought this plug belonged in this jack, and have been putting it in the   
   jack, we think that    
   this is why my MCC works for him, and not for me.   
   > The new MCC I bought worked when I first got it, but now acts like the old   
   one. Of course this is after I plugged the plug into the P9 jack.   
   > So my questions are this   
   >   
   > 1. Does it sound like I have been shorting out the MCC by putting this plug   
   into the wrong jack.   
   > 2. Is there anything I can do other than send it back to the man to repair   
   it ?   
   > Hopefully this will fix my issues.   
      
   i asked you way back in dec if you had right plugs on you don,t need   
   metters hooked up  but i,ll bet you blew the board. mark your plugs   
   with a marker but try the board  with jack 9 empty good luck   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)