On Sunday, July 7, 2013 5:51:08 PM UTC-5, robsher...@msn.com wrote:   
   > It has been months since I fired up my jukebox. But the same problems   
   persist. When you turn it on, the cd rack spins, deposits CD's on the player,   
   and then picks them up again. Does that a few times, and shuts off, and the   
   MCC board error lights up.   
   >   
   > I run error codes, and no errors show up.   
   >   
   > The machine will initialize all CD's and recognize all 100 of them. But when   
   you push the buttons to play something, nothing happens.   
   >   
   > When you turn the machine off, and go into service mode and run   
   initialization, the machine will play the last songs you programmed.   
   >   
   > Now the strange thing is this, when the MCC board is in another machine, it   
   runs perfect with no board error light. Ergo, the MCC is not the problem.   
   >   
   > The CCC has been tested, and it to passes. So we can eliminate that as the   
   problem.   
   >   
   > CD Player has been replaced, and everything happens with a new CD player, so   
   that is not the problem.   
   >   
   > I checked the voltages, and everything seems to tally with the voltages they   
   are supposed to be.   
   >   
   > Replaced the optic sensor, and adjusted it, and that is not an issue.   
   >   
   > I am about to send it to the shop for a professional going over, but thought   
   I might save some money if somebody might know what the issue is.   
   >   
   > Thanks.   
      
   Try unpluging the plugs that go to the computer. and pluging them back in or     
   moving them around with Your fingers, some times they lose contact.   
   doc ellis   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)