On Wednesday, August 28, 2013 10:45:52 AM UTC+12, John Robertson wrote:   
   > On 08/27/2013 1:05 PM, pinball_10@clear.net.nz wrote:   
   >   
   > > On Wednesday, August 28, 2013 4:16:14 AM UTC+12, John Robertson wrote:   
   >   
   > >> On 08/26/2013 11:47 PM, pinball_10@clear.net.nz wrote:   
   >   
   > >>   
   >   
   > >>> Hi folks   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> I am having an issue when attempting programming on a recently acquired   
   NSM Performer Grand. After calling up command numbers I am getting an error   
   message when attempting to enter them with H.   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> That is:   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> Whilst attempting to record the title quantities of all the CD's, I am   
   entering P 160 H (the error coming when I enter the H.   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> Any ideas?.   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> Note:   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> I have another Performer Grand here. When I pull the interlock switch   
   out on that one to begin programming I get:   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> P0 10  1  83 as it should display. However, on the one I am having an   
   issue with I am getting:   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> PO 1      03   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> Any ideas would be most appreciated   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>> :)   
   >   
   > >>   
   >   
   > >>>   
   >   
   > >>   
   >   
   > >>   
   >   
   > >>   
   >   
   > >> Try testing the keyboard from the suspect machine in the working one.   
   >   
   > >>   
   >   
   > >> You may have a problem there or in the cable...   
   >   
   > >>   
   >   
   > >>   
   >   
   > >>   
   >   
   > >> Then sub the computer etc.   
   >   
   > >>   
   >   
   > >>   
   >   
   > >>   
   >   
   > >> John :-#)#   
   >   
   > >   
   >   
   > > Thanks, John!. It was just suggested to me that the programming and   
   numbers are slightly different between the Performer Grand and the Performer   
   Grand II. I am using one manual for the two, so that may be my issue?...   
   >   
   > >   
   >   
   >   
   >   
   > Didn't realize you have Performer Grand and Performer Grand II. Manuals   
   >   
   > are a bit different I suspect. Keyboard and computer will be different too.   
   >   
   >   
   >   
   > John :-#)#   
   >   
   >   
   >   
   > --   
   >   
   > (Please post followups or tech inquiries to the newsgroup)   
   >   
   > John's  Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9   
   >   
   > (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)   
   >   
   >                       www.flippers.com   
   >   
   >         "Old pinballers never die, they just flip out."   
      
      
   I downloaded a manual for the Performer Grand, and, unless I am mistaken (or   
   missing something), there is no program for recording title quantities of the   
   CD's (as in the Performer Grand 2000 and the Performer Grand II)..?.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)