From: jukedr@hotmail.com   
      
   On Saturday, October 12, 2013 12:37:32 PM UTC-4, ultraliter wrote:   
   > I have to replace my motor run capacitor and the old one has no markings   
   >    
   > on it. Does anyone know how to wire up the new one.   
   >    
   > Thanks   
   > I've seen some variations on wire colors on this circuit, so I'll list my   
   wire colors and their destination.  White wire to common - goes to reversing   
   switch.  Green wire to 1.0 - goes to the upper right terminal on the motor   
   board and the "O" contact    
   on the cam switch (2nd set from the top).  Yellow wire to 1.4 - goes to the   
   "O" contact on the cam switch. Hope this is helpful.  Ray   
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   > --    
   >    
   > ultraliter   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)