From: darrellschalla@gmail.com   
      
   On Saturday, January 25, 2014 7:55:31 PM UTC-6, JeffP wrote:   
   > This info is very vague... Did you just get this machine?  Are all the   
   >    
   > CD's initialized? Has it worked for you in the past and is now not   
   >    
   > working? What was the sequeunce of events that took place from the time   
   >    
   > it worked and the time that it stopped working?   
   >    
   >    
   >    
   > Does it have any recorded errors?   
   >    
   >    
   >    
   > Put the machine into service mode and check fto see if there are any   
   >    
   > errors:   
   >    
   >    
   >    
   > 1 enter Sevice Mode   
   >    
   > 2 type 8 for status   
   >    
   > 3 type 0 for error history   
   >    
   > 4 push Popular to see the first error   
   >    
   > 5 Hold the Reset Button and push 9 to see first occurance of this error   
   >    
   > 6 Hold the reset Button and push 9 to see last  occurance of this error   
   >    
   > 7 Hold the Reset Button and push 3 to see the next error in history   
   >    
   > 8 repeat steps 5 6 and 7 as often as necessary to see all errors   
   >    
   >    
   >    
   >    
   >    
   > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *   
   >    
   > * * * *   
   >    
   >    
   >    
   > Put the machine into service mode and clear any errors:   
   >    
   >    
   >    
   > 1 enter Sevice Mode   
   >    
   > 2 type 8 for status   
   >    
   > 3 type 1 to Clear Errors   
   >    
   > 4 push Popular   
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   > --    
   >    
   > JeffP   
      
   Sorry about the little info   
      
   I have owned this 45 rpm Rowe Bubbler from brand new. I has wallboxes hooked   
   up to it. I did have a keyboard error and a wallbox error but |I didn't write   
   them down. I cleared the errors and nothing else came up probably because the   
   machine isn't working    
   at all.   
      
   I took out the cell battery a couple years ago and replaced with rechargeable   
   mounted off the board.   
      
   The machine only scans when I put it into service mode and hit the scan   
   button. when you make a selection it takes the credit off and the numbers   
   selected come up on the display but nothing happens. The led on the display   
   changes from to record playing    
   and the display shows selection 115 but the magazine doesn't rotate.    
      
   I believe the machine uses the same computer and mech as the R91. I tried the   
   mech board in a R85, it is a little different but does work in that machine.   
      
   I don't know what actually happened when it stopped working other than   
   selections were made it wouldn't play.   
      
   Thank you for your response and any help.   
   Darrell   
      
      
   On Saturday, January 25, 2014 7:55:31 PM UTC-6, JeffP wrote:   
   > This info is very vague... Did you just get this machine?  Are all the   
   >    
   > CD's initialized? Has it worked for you in the past and is now not   
   >    
   > working? What was the sequeunce of events that took place from the time   
   >    
   > it worked and the time that it stopped working?   
   >    
   >    
   >    
   > Does it have any recorded errors?   
   >    
   >    
   >    
   > Put the machine into service mode and check fto see if there are any   
   >    
   > errors:   
   >    
   >    
   >    
   > 1 enter Sevice Mode   
   >    
   > 2 type 8 for status   
   >    
   > 3 type 0 for error history   
   >    
   > 4 push Popular to see the first error   
   >    
   > 5 Hold the Reset Button and push 9 to see first occurance of this error   
   >    
   > 6 Hold the reset Button and push 9 to see last  occurance of this error   
   >    
   > 7 Hold the Reset Button and push 3 to see the next error in history   
   >    
   > 8 repeat steps 5 6 and 7 as often as necessary to see all errors   
   >    
   >    
   >    
   >    
   >    
   > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *   
   >    
   > * * * *   
   >    
   >    
   >    
   > Put the machine into service mode and clear any errors:   
   >    
   >    
   >    
   > 1 enter Sevice Mode   
   >    
   > 2 type 8 for status   
   >    
   > 3 type 1 to Clear Errors   
   >    
   > 4 push Popular   
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   >    
   > --    
   >    
   > JeffP   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)