I have a 1448 that had 19 selections out of the 120 not working. Juke was   
   completely torn down and all contacts clean/adjusted, also tore apart the pin   
   banks (X's 4) under the selector buttons and cleaned all contacts. After doing   
   this 3 of the 19 none    
   working buttons started working. I still have 16 none working buttons. I am   
   going to tear apart the large connector coming off the pin banks to get to the   
   female ends that I didn't do the first time around. Anybody have any   
   experience with this issue?    
   Any guidance will be very much appreciated.    
   Bill   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)