John,    
   After about 200 plays the circuit breaker started popping. I tried my voodoo   
   again with an external supply and it worked for about 40 plays--then the   
   breaker started popping again.   
      
   I pulled it out and, without a load it was a hair over 2 amps.   
       
   I took the motor apart per your instructions. You were exactly, 100%, without   
   any question, correct. I cleaned all the lose dust out and found an old razor   
   blade in a parts drawer and worked with some magnifying goggles for about 20   
   minutes. Then I used    
   a toothbrush to get anything left. Amps came down under .25 .   
      
   I just installed it into the machine and I'm amazed how FAST it loads and   
   unloads the record!    
      
   Thankfully the other motor is drawing .25 because it looks too buried to   
   remove.     
      
   John, I couldn't have done this without you and this thread.    
      
   Regards,   
   John     
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)