Hi Steve    
      
   I think the 1468 is going to be very close to a 1438/46. I am looking at the   
   1438 manual and the carriage assembly is what I think you are referring to.    
      
   You need to check the bottom of the carriage assembly and look at the contact   
   blocks. Once a selection is made and the little lever on the coil bank flips   
   outward into its path the carriage assembly should make contact with it and   
   should stop the    
   magazine rotation at the selection you made. This is a critical function and   
   from what you are describing this is where I would start.   
      
   Hope this helps.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)